Total
5965 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-21759 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: extend RCU protection in igmp6_send() igmp6_send() can be called without RTNL or RCU being held. Extend RCU protection so that we can safely fetch the net pointer and avoid a potential UAF. Note that we no longer can use sock_alloc_send_skb() because ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep. Instead use alloc_skb() and charge the net->ipv6.igmp_sk socket under RCU protection. | ||||
| CVE-2025-21731 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: nbd: don't allow reconnect after disconnect Following process can cause nbd_config UAF: 1) grab nbd_config temporarily; 2) nbd_genl_disconnect() flush all recv_work() and release the initial reference: nbd_genl_disconnect nbd_disconnect_and_put nbd_disconnect flush_workqueue(nbd->recv_workq) if (test_and_clear_bit(NBD_RT_HAS_CONFIG_REF, ...)) nbd_config_put -> due to step 1), reference is still not zero 3) nbd_genl_reconfigure() queue recv_work() again; nbd_genl_reconfigure config = nbd_get_config_unlocked(nbd) if (!config) -> succeed if (!test_bit(NBD_RT_BOUND, ...)) -> succeed nbd_reconnect_socket queue_work(nbd->recv_workq, &args->work) 4) step 1) release the reference; 5) Finially, recv_work() will trigger UAF: recv_work nbd_config_put(nbd) -> nbd_config is freed atomic_dec(&config->recv_threads) -> UAF Fix the problem by clearing NBD_RT_BOUND in nbd_genl_disconnect(), so that nbd_genl_reconfigure() will fail. | ||||
| CVE-2025-21727 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ | ||||
| CVE-2025-21726 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: padata: avoid UAF for reorder_work Although the previous patch can avoid ps and ps UAF for _do_serial, it can not avoid potential UAF issue for reorder_work. This issue can happen just as below: crypto_request crypto_request crypto_del_alg padata_do_serial ... padata_reorder // processes all remaining // requests then breaks while (1) { if (!padata) break; ... } padata_do_serial // new request added list_add // sees the new request queue_work(reorder_work) padata_reorder queue_work_on(squeue->work) ... <kworker context> padata_serial_worker // completes new request, // no more outstanding // requests crypto_del_alg // free pd <kworker context> invoke_padata_reorder // UAF of pd To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work' into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish. | ||||
| CVE-2025-21715 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: net: davicom: fix UAF in dm9000_drv_remove dm is netdev private data and it cannot be used after free_netdev() call. Using dm after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. This is similar to the issue fixed in commit ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove"). This bug is detected by our static analysis tool. | ||||
| CVE-2024-57984 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition In dw_i3c_common_probe, &master->hj_work is bound with dw_i3c_hj_work. And dw_i3c_master_irq_handler can call dw_i3c_master_irq_handle_ibis function to start the work. If we remove the module which will call dw_i3c_common_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dw_i3c_hj_work dw_i3c_common_remove | i3c_master_unregister(&master->base) | device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in dw_i3c_common_remove. | ||||
| CVE-2024-49570 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/tracing: Fix a potential TP_printk UAF The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format") exposes potential UAFs in the xe_bo_move trace event. Fix those by avoiding dereferencing the xe_mem_type_to_name[] array at TP_printk time. Since some code refactoring has taken place, explicit backporting may be needed for kernels older than 6.10. | ||||
| CVE-2022-49669 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race on unaccepted mptcp sockets When the listener socket owning the relevant request is closed, it frees the unaccepted subflows and that causes later deletion of the paired MPTCP sockets. The mptcp socket's worker can run in the time interval between such delete operations. When that happens, any access to msk->first will cause an UaF access, as the subflow cleanup did not cleared such field in the mptcp socket. Address the issue explicitly traversing the listener socket accept queue at close time and performing the needed cleanup on the pending msk. Note that the locking is a bit tricky, as we need to acquire the msk socket lock, while still owning the subflow socket one. | ||||
| CVE-2022-49505 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: NFC: NULL out the dev->rfkill to prevent UAF Commit 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") assumes the device_is_registered() in function nfc_dev_up() will help to check when the rfkill is unregistered. However, this check only take effect when device_del(&dev->dev) is done in nfc_unregister_device(). Hence, the rfkill object is still possible be dereferenced. The crash trace in latest kernel (5.18-rc2): [ 68.760105] ================================================================== [ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750 [ 68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313 [ 68.760756] [ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4 [ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 68.760756] Call Trace: [ 68.760756] <TASK> [ 68.760756] dump_stack_lvl+0x57/0x7d [ 68.760756] print_report.cold+0x5e/0x5db [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] kasan_report+0xbe/0x1c0 [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] __lock_acquire+0x3ec1/0x6750 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? register_lock_class+0x18d0/0x18d0 [ 68.760756] lock_acquire+0x1ac/0x4f0 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0 [ 68.760756] ? nla_get_range_signed+0x540/0x540 [ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 68.760756] _raw_spin_lock_irqsave+0x39/0x50 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] rfkill_blocked+0xe/0x60 [ 68.760756] nfc_dev_up+0x84/0x260 [ 68.760756] nfc_genl_dev_up+0x90/0xe0 [ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230 [ 68.760756] ? security_capable+0x51/0x90 [ 68.760756] genl_rcv_msg+0x280/0x500 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? lock_acquire+0x1ac/0x4f0 [ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] netlink_rcv_skb+0x11b/0x340 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? netlink_ack+0x9c0/0x9c0 [ 68.760756] ? netlink_deliver_tap+0x136/0xb00 [ 68.760756] genl_rcv+0x1f/0x30 [ 68.760756] netlink_unicast+0x430/0x710 [ 68.760756] ? memset+0x20/0x40 [ 68.760756] ? netlink_attachskb+0x740/0x740 [ 68.760756] ? __build_skb_around+0x1f4/0x2a0 [ 68.760756] netlink_sendmsg+0x75d/0xc00 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] sock_sendmsg+0xdf/0x110 [ 68.760756] __sys_sendto+0x19e/0x270 [ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0 [ 68.760756] ? fd_install+0x178/0x4c0 [ 68.760756] ? fd_install+0x195/0x4c0 [ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 68.760756] __x64_sys_sendto+0xd8/0x1b0 [ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130 [ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] RIP: 0033:0x7f67fb50e6b3 ... [ 68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3 [ 68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003 [ 68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c [ 68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e [ 68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003 [ 68.760756] </TASK> [ 68.760756] [ 68.760756] Allocated by task 279: [ 68.760756] kasan_save_stack+0x1e/0x40 [ ---truncated--- | ||||
| CVE-2022-49390 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: macsec: fix UAF bug for real_dev Create a new macsec device but not get reference to real_dev. That can not ensure that real_dev is freed after macsec. That will trigger the UAF bug for real_dev as following: ================================================================== BUG: KASAN: use-after-free in macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 Call Trace: ... macsec_get_iflink+0x5f/0x70 drivers/net/macsec.c:3662 dev_get_iflink+0x73/0xe0 net/core/dev.c:637 default_operstate net/core/link_watch.c:42 [inline] rfc2863_policy+0x233/0x2d0 net/core/link_watch.c:54 linkwatch_do_dev+0x2a/0x150 net/core/link_watch.c:161 Allocated by task 22209: ... alloc_netdev_mqs+0x98/0x1100 net/core/dev.c:10549 rtnl_create_link+0x9d7/0xc00 net/core/rtnetlink.c:3235 veth_newlink+0x20e/0xa90 drivers/net/veth.c:1748 Freed by task 8: ... kfree+0xd6/0x4d0 mm/slub.c:4552 kvfree+0x42/0x50 mm/util.c:615 device_release+0x9f/0x240 drivers/base/core.c:2229 kobject_cleanup lib/kobject.c:673 [inline] kobject_release lib/kobject.c:704 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x1c8/0x540 lib/kobject.c:721 netdev_run_todo+0x72e/0x10b0 net/core/dev.c:10327 After commit faab39f63c1f ("net: allow out-of-order netdev unregistration") and commit e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"), we can add dev_hold_track() in macsec_dev_init() and dev_put_track() in macsec_free_netdev() to fix the problem. | ||||
| CVE-2022-49388 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_create_volume: Fix use-after-free when volume creation failed There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path: ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link]. | ||||
| CVE-2022-49385 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: driver: base: fix UAF when driver_attach failed When driver_attach(drv); failed, the driver_private will be freed. But it has been added to the bus, which caused a UAF. To fix it, we need to delete it from the bus when failed. | ||||
| CVE-2022-49291 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity. | ||||
| CVE-2022-49288 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations). | ||||
| CVE-2022-49258 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccree - Fix use after free in cc_cipher_exit() kfree_sensitive(ctx_p->user.key) will free the ctx_p->user.key. But ctx_p->user.key is still used in the next line, which will lead to a use after free. We can call kfree_sensitive() after dev_dbg() to avoid the uaf. | ||||
| CVE-2022-49236 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to race between btf_try_get_module and load_module While working on code to populate kfunc BTF ID sets for module BTF from its initcall, I noticed that by the time the initcall is invoked, the module BTF can already be seen by userspace (and the BPF verifier). The existing btf_try_get_module calls try_module_get which only fails if mod->state == MODULE_STATE_GOING, i.e. it can increment module reference when module initcall is happening in parallel. Currently, BTF parsing happens from MODULE_STATE_COMING notifier callback. At this point, the module initcalls have not been invoked. The notifier callback parses and prepares the module BTF, allocates an ID, which publishes it to userspace, and then adds it to the btf_modules list allowing the kernel to invoke btf_try_get_module for the BTF. However, at this point, the module has not been fully initialized (i.e. its initcalls have not finished). The code in module.c can still fail and free the module, without caring for other users. However, nothing stops btf_try_get_module from succeeding between the state transition from MODULE_STATE_COMING to MODULE_STATE_LIVE. This leads to a use-after-free issue when BPF program loads successfully in the state transition, load_module's do_init_module call fails and frees the module, and BPF program fd on close calls module_put for the freed module. Future patch has test case to verify we don't regress in this area in future. There are multiple points after prepare_coming_module (in load_module) where failure can occur and module loading can return error. We illustrate and test for the race using the last point where it can practically occur (in module __init function). An illustration of the race: CPU 0 CPU 1 load_module notifier_call(MODULE_STATE_COMING) btf_parse_module btf_alloc_id // Published to userspace list_add(&btf_mod->list, btf_modules) mod->init(...) ... ^ bpf_check | check_pseudo_btf_id | btf_try_get_module | returns true | ... ... | module __init in progress return prog_fd | ... ... V if (ret < 0) free_module(mod) ... close(prog_fd) ... bpf_prog_free_deferred module_put(used_btf.mod) // use-after-free We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier callback when MODULE_STATE_LIVE state is reached for the module, so that we return NULL from btf_try_get_module for modules that are not fully formed. Since try_module_get already checks that module is not in MODULE_STATE_GOING state, and that is the only transition a live module can make before being removed from btf_modules list, this is enough to close the race and prevent the bug. A later selftest patch crafts the race condition artifically to verify that it has been fixed, and that verifier fails to load program (with ENXIO). Lastly, a couple of comments: 1. Even if this race didn't exist, it seems more appropriate to only access resources (ksyms and kfuncs) of a fully formed module which has been initialized completely. 2. This patch was born out of need for synchronization against module initcall for the next patch, so it is needed for correctness even without the aforementioned race condition. The BTF resources initialized by module initcall are set up once and then only looked up, so just waiting until the initcall has finished ensures correct behavior. | ||||
| CVE-2022-49179 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: don't move oom_bfqq Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] ra ---truncated--- | ||||
| CVE-2022-49136 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed. | ||||
| CVE-2022-49085 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: drbd: Fix five use after free bugs in get_initial_state In get_initial_state, it calls notify_initial_state_done(skb,..) if cb->args[5]==1. If genlmsg_put() failed in notify_initial_state_done(), the skb will be freed by nlmsg_free(skb). Then get_initial_state will goto out and the freed skb will be used by return value skb->len, which is a uaf bug. What's worse, the same problem goes even further: skb can also be freed in the notify_*_state_change -> notify_*_state calls below. Thus 4 additional uaf bugs happened. My patch lets the problem callee functions: notify_initial_state_done and notify_*_state_change return an error code if errors happen. So that the error codes could be propagated and the uaf bugs can be avoid. v2 reports a compilation warning. This v3 fixed this warning and built successfully in my local environment with no additional warnings. v2: https://lore.kernel.org/patchwork/patch/1435218/ | ||||
| CVE-2022-49078 | 2025-02-27 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: lz4: fix LZ4_decompress_safe_partial read out of bound When partialDecoding, it is EOF if we've either filled the output buffer or can't proceed with reading an offset for following match. In some extreme corner cases when compressed data is suitably corrupted, UAF will occur. As reported by KASAN [1], LZ4_decompress_safe_partial may lead to read out of bound problem during decoding. lz4 upstream has fixed it [2] and this issue has been disscussed here [3] before. current decompression routine was ported from lz4 v1.8.3, bumping lib/lz4 to v1.9.+ is certainly a huge work to be done later, so, we'd better fix it first. [1] https://lore.kernel.org/all/000000000000830d1205cf7f0477@google.com/ [2] https://github.com/lz4/lz4/commit/c5d6f8a8be3927c0bec91bcc58667a6cfad244ad# [3] https://lore.kernel.org/all/CC666AE8-4CA4-4951-B6FB-A2EFDE3AC03B@fb.com/ | ||||